Control Panel and Display
POWER key: press the key to turn on or turn off the unit.
Press LOCK key more than 2s, all the keys functions will failure. Press LOCK key
more than 2s, LOCK key function will failure, all the keys funtions will recovery
MODE key: after the unit is plug in, press the push button to select the mode of
auto dehumidifying, high dehumidifying, low dehumidifying, ect.
TIMER key: to set unit off automatically when the unit is on or to set unit ON au-
tomatically when the unit is OFF. The range of time is from 1, 2, 3...24, 23, 22...1
hour per each press of the key.
HUMIDITY key: press the key to set the exact humidity as you want, the range
of humidity will recycle from 40%, 45%, 50%...70%, 65%, 60%...40% per each
press of the key. Or you could press the key to set the fan speed in high or low
when the unit is running under the mode of air purify.
High dehumidifying icon.
Low dehumidifying icon.
Air purify icon.
Drying icon.
The icon will occur when the water tank is full or the tank is in wrong installation.
Auto dehumidifying icon. When the unit is plugged in, the default mode is in auto dehu-
midifying. You could press the MODE key to adjust the mode as you want.
Humidity read out: it will show room humidity when the unit is running under the mode
of Auto / high / Low dehumidifying & air purify. And it will show the setting humidity
under the mode of auto dehumidifying.
12