Reolink Argus PT Guia De Inicio Rapido página 6

Important Notes of Camera Installation
For outdoor use, please install the Argus PT upside down in order to maximize
the waterproof performance and the PIR motion sensor's efficiency.
For indoor use, the camera can be placed upright, but please make sure to
place it at a maximum of 2.5 meters from the ground.
• PIR Sensor Detecting Distance
The PIR senor has 3 sensitivity levels for your adjustment: Low/Mid/High.
Higher sensitivity offers longer detecting distance. The default sensitivity of the PIR sensor is at "Mid".
Detecting Distance
Sensitivity
Value
(For moving and living things)
Low Up to 5 meters (16ft)
0 - 50
Mid Up to 8 meters (26ft)
51 - 80
High Up to 10 meters (33ft)
81 - 100
Note:
The path to adjust the sensitivity level on Reolink App: Device settings-PIR settings.
8 English
Detecting Distance
(For moving vehicles)
Up to 10 meters (33ft)
Up to 12 meters (40ft)
Up to 16 meters (52ft)
Important Notes for Reducing
!
False Alarms
To reduce false alarms, please note that:
• Do not install the camera facing any objects with bright lights, including sunshine,
bright lamp lights, etc.
• Do not place the camera too close to a place where there are frequently moving
vehicles. Based on our numerous tests, the recommended distance between the
camera and the vehicle is 16 meters (52ft).
• Stay away from the outlets, including the air conditioner vents, humidifier outlets, the
heat transfer vents of projectors, etc.
• Do not install the camera where there are strong winds.
• Do not install the camera facing the mirror.
• Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi
routers and phones in order to avoid wireless interference.
Note:
When in rotating status, the camera will record motion detection videos when the PIR
sensor is triggered, but will not send any push or email notifications.
English 9