WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn't start-up :
• The hob is badly connected on the electrical network.
• The protection fuse cut-off.
• The locking function is activated.
• The sensitive keys are covered with grease or water.
• An object is put on a key.
The symbol [ E ] displays:
• Call the After-sales Service.
One or all cooking zone cut-off :
• The safety system functioned.
• You forgot to cut-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of power level and breaking Automatic
overheating
The automatic cooking don't start :
• The cooking zone is still hot [ H ].
• The highest power level is set [ 9 ]
The control panel displays [ L ] :
• Refer to the chapter control panel locking page.
The control panel displays [ Er03 ] :
• An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ ER21 ] :
•
The hob is overheated, let it cool and then turnit on again.
The control panel displays [ U400 ], [ Er25 ]or [ U4 ] :
• The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the SAV.
ENVIRONMENT PROTECTION
The packaging material is ecological and can be recycled.
The worn appliances contain certain noble metals. Apply to the local government about the
possibilities of recycling.
Don't dispose of your appliance with general household waste
Get in touch with the waste collection centre of your local council
that control the recycling of household appliances.
24