POWERSUPPLY_____________________
Charging
Check that the mains voltage on the
type plate of the charging unit (on
the bottom) corresponds to your local
mains supply.
1
Place the toothbrush on the charg-
F
ing unit
.
2
Plug the charging unit into the
wall socket.
Notes
▪
Charge the batteries fully before
you use the appliance for the first
time. It takes approximately 24
hours (12 hours charging time
afterwards) to charge them ini-
tially. When the appliance is fully
charged, the charge LED
up green.
OPERATION __________________________
Attachthebrushhead
Place the brush head
B
er
. Make sure that the notches of
the holder match the attachment.
ENGLISH
2 0
E
lights
A
on the hold-
▪
The ambient temperature should
be between 5 °C and 40 °C.
▪
When the batteries are fully
charged, they provide approxi-
mately 75 days of operation. The
charging process ends automati-
cally once the batteries are fully
charged. We recommend keeping
the appliance in the charging unit
so that it is available fully charged
at all times.
Note
▪
Replace the brush head when
the bristles become bent and dis-
torted and the wear indicator be-
comes brighter at the side of the
bristles. We recommend you to do
this every 3 months.