Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
29
J
Slide metal toe panel into position ensuring the bottom of the toe panel is
flush with the floor. Use screw (J) to mount the toe panel through the hole
it matches up with on the metal brackets (K) as shown.
Note: The toe panel height can be adjusted by screwing into a different
hole in the bracket.
Check for correct fit of apron by opening the door. Ensure the apron does
not bind up and can freely move up and down behind the toe panel. Your
installation is complete!
26
Publicidad
Tabla de contenido
