Lcd Panel - PowerWalker 1000 LCD Manual De Instrucciones

3-2. LCD Panel

EN
Display
Backup time information
Configuration and fault information
Mute operation
Output information
Load information
Programmable outlets information
Mode operation information
Function
Indicates the estimated backup time.
H: hours, M: minute, S: second
Indicates the configuration items, and the configuration items are
listed in details in section 3-5.
Indicates the warning and fault codes, and the codes are listed in
details in 3-7 and 3-8 sections.
Indicates that the UPS alarm is disabled.
Indicates the output voltage and output frequency.
Vac: AC voltage, Vdc: DC voltage, Hz: frequency
Indicates the load level by 0-24%, 25-49%, 50-74%, and
75-100%.
Indicates overload.
Indicates the load or the UPS output is short circuit.
Indicates that programmable management outlets are working.
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the ECO mode is enabled.