Information Codes - Samsung DW80J3020 Serie User Manual

INFORMATION CODES

The Control Panel displays information codes to help you understand what is occurring with your
dishwasher. The codes take the form of blinking cycle selector lights. If you see any of the codes listed
below, you should select the Cancel and Drain option, and then follow the instructions in the Solution
column.
Code Symbol
For any codes not listed above, call 1-800-SAMSUNG (726-7864)
DW6000J_DD81-01825A-01_EN.indd Sec7:25 DW6000J_DD81-01825A-01_EN.indd Sec7:25
Meaning
Functional check. With the dishwasher empty, add
detergent, and then run a cycle.
High temperature heating
If the problem continues, go to your house circuit breaker
check
panel, set the dishwasher's circuit breaker switch to off,
and then contact an authorized Samsung service center.
Check whether the faucet is closed, the water supply
is suspended, or the water line is frozen or clogged by
foreign particles.
Water supply check
If the problem continues, Turn off the faucet, and then
contact an authorized Samsung service center.
Turn off the faucet and go to your house circuit breaker
Over-level water check panel, set the dishwasher's circuit breaker switch to off,
and then contact an authorized Samsung service center.
If a water supply valve connection leak occurs, turn
off the faucet and go to your house circuit breaker
panel, set the dishwasher's circuit breaker switch to
off, and then contact your installer or a plumber to fi x
Leakage check
the leak.
If the problem continues, contact an authorized
Samsung service center.
English - 25
Solution
2015-08-11 2015-08-11 11:28:33 11:28:33