Information Codes - Samsung DW60A807 Serie Manual Del Usuario

Troubleshooting

Information codes

If the dishwasher fails to operate, you may see an information code on the display. Check
the table below and try the suggestions.
Code
Leakage check
• Close the water supply valve. Go to your home's circuit breaker panel,
LC
Water supply check
• Check if the water supply valve is closed, if the water supply is
4C
PCB communication check
AC • Abnormal communication between the main PCB and the sub PCB.
• If the problem continues, contact an authorised Samsung service center.
High temperature heating check
• Functional check. With the dishwasher empty, add detergent, and then
HC
Thermistor check
tC
• Temperature sensor is broken (short or open circuit). If the problem
Washing pump check
3C
• Abnormal working with washing pump. If the issue continues, contact a
Distribution motor check
PC
• Abnormal working with distribution motor assembly, or main PCB. If the
Check filter and drain pipe. If it is jammed, clean it. If the issue continues,
5C
contact a local Samsung service center.
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
72 English
DW8500AM_DW60A8070BB_EF_DD81-03206D-03_EN.indd 72
and set the dishwasher's circuit breaker switch to off. Then, contact the
installer to repair. If the issue continues, contact a local Samsung service
center.
suspended, or if the water inlet valve or line is frozen or clogged by
foreign particles. If the issue continues, contact a local Samsung service
center.
run a cycle. If the issue continues, go to your home's circuit breaker
panel, and set the dishwasher's circuit breaker switch to off. Then,
contact a Samsung service center.
continues, contact an authorised Samsung service center.
local Samsung service center.
issue continues, contact a local Samsung service center.
Action
2021-08-10 1:37:52