Denver ACT-5020TW Guía Rápida página 15

Setting date and time:
Press Power key to open the menu, press Mode key to switch to setting menu, and then press Shutter key to confirm. Press
Down key to select "Date and time" in menu item, and then press Shutter key to enter setting window.
In setting window, press Mode key to select items (date, time) to be adjusted, and then press Up key or Down key to make
adjustment, press Shutter key for conformation at completion of adjustment, or press Power key to cancel setting and exit.
Finally, press Power key to exit from setting mode.
Playback mode menu setting
In playback mode press power key to open playback main menu, press Up or Down key to select menu, press Shutter key
to enter submenu. In the submenu, press Up or Down key for selection, and press Shutter key to confirm. After returning
to the main menu, press Mode key to exit from the menu.
Startup/Startdown
1 Startup: press the POWERkey for 3 second, the camera will show startup screen and enters intoPOWERONstate;
2 Shutdown:press the POWER key for 3 second when the camera is under idle mode to shutdown;
3 Auto shutdown: the camerawill be shut down automatically when the camera is under idle mode for acertain time to save
power. The default time for auto shutdown is 3 min.
4 Shutdown under low power: when the batteryis under low power, the LCD will indicate "
battery ti mely. When the icon turns red andflashes, the camera will be shut down automatically
Battery Charging:
The camera is equipped with built-in 3.7V lithium battery. Please ensure power available for the camera and timely charge
it in case of low battery.
Connect the camera to computer for charging under shutdown status. The charging indicator will be on when charging,
and will be off when the battery is fully charged. Generally, the battery can be fully charged after about 4 hours.
ACT-5020TW Quick Start Guide
ENG 13
". Please charge the