Thompson DsC - 525W Manual Del Usuario página 42

d - CONFigurATiON ANd uSE
Select the display language, then enter the username
and password for connecting to your camera. The
default username is admin and the password is left
blank, so you should leave the fi eld empty. At the
fi rst connection, the camera will immediately ask you
to replace the default username and password to
improve security:
When you have fi nished changing the username and
password, you will be asked to log back in.
once you have logged in with your new username
and password, the camera feed will be displayed:
18
en
Motorised 1080p ip Wi-Fi caMera
1 2 3 4
6 7 8 9
1 Vertical image inversion
Anti-fl icker: if the image lighting is artifi cial,
2
select 50 Hz. If the light source is natural,
select "extérieur [outdoor]".
Quick quality and frame rate selection
3
Horizontal image inversion
4
Access to camera confi guration tab
5
Brightness, contrast and colour settings
6
Manual activation of night vision
7
Activate computer microphone if present: lets
8
you speak through the camera's speaker
Activate the camera microphone: lets you
9
listen to the camera surroundings
Take a snapshot of the camera image on the
10
computer
Take a video of the camera image on the
11
computer
Display the image in full screen (double-click
12
to revert)
You can access your camera settings by clicking on
"Réglages [settings]" at the top of the window:
5
10 11 12