Thompson DSC-925W Manual Del Usuario página 38

D - CONFIGURATION AND USE
To add your camera, click on the
"Ajouter un périphérique [Add a device]" icon on the
top left:
1 2 3 4
11 12 13
Camera UID (unique code shown on the
1
camera).
Camera username (default is
2
"admin")
Type of device: select "THOMSON IPC"
3
Name under which the camera will
4
appear in the software (according to your
preference)
P2P connection: to be ticked to add a
5
camera using its UID. The UID of each of
the cameras is a unique code of 20 to 24
numbers and letters, shown on the camera
itself.
Current camera IP address
6
Camera password (none by default; leave
7
blank)
Test button for information entered: enables
8
you to check the connection, user name and
password entered
Current MAC address of the camera
9
Camera connection port (default 88)
10
Information related to the camera that you
11
are in the process of adding
Button that adds the camera with the
12
information shown at the top of the window
Results of a camera search on the network
13
connected to the computer
Search button: searches for cameras on the
14
network to which the computer is connected
14
EN
5 6 7 8 9
u . e i t y u r e c n s s o m o t h w . w w
MOTORISED 1080P IP WI-FI CAMERA
• Carry out the following steps to easily connect
your camera:
• Check the "Connexion P2P [P2P connection]"
box.
10
• Click the "Recherche [Search]" button to fi nd
your camera on the network to which your
computer is connected.
• In the list of cameras found, click on the
one you wish to add to the software. The
information in the top part of the window
is fi lled in automatically when you select a
camera from the list.
• If necessary, change the username and
password to connect to the camera (the default
user name is "admin" and the password must
be left blank).
• Click on "Vérifi cation de la connexion [Check
connection]" to check the camera connection
and data entered.
• Finally, click on "Ajouter" [Add].
When you connect your camera for the fi rst time,
14
you are immediately asked to change the user
name and password for camera connection, for
increased security:
Once you have modifi ed the user name and
password, the camera appears on the list on the
right side of the software's main screen. Drag the
line of your camera into one of the viewing windows
to display the image:
Note: it is possible to connect a camera that is not
present on the network to which the computer is
connected. In step 3 above, enter the camera UID
manually: as it is not on the same network it will not
be detected and fi lled in automatically.