Configuration Using A Web Browser - Thompson DSC-925W Manual Del Usuario

D - CONFIGURATION AND USE
This completes the confi guration. From now on, any
movement detected by the camera in the zones
and at the times you have specifi ed will trigger an
email alert.

3 - CONFIGURATION USING A WEB BROWSER

Warning: frequent policy changes made by the
main web browser developers as well as the
number of possible confi gurations and versions can
make it tricky to confi gure your camera. If possible,
it is preferable to use a smartphone, tablet or
dedicated software.
• Please download the IP Camera Tool software
available from our website:
http://www.thomsonsecurity.eu/docs.
php?lang=FR&type=5&ref=512493
• This will detect your camera on the network
and show its IP address.
• Double-click on its name to open the camera
confi guration in your web browser.
Your browser will need an additional module to
display the image from your camera correctly and
will ask you if you want to install it. Accept the
request to allow your browser to display the image:
Note: Depending on which browser you are using,
the procedure may differ but the principle remains
the same: you must permanently allow the module
to run if you want your camera to work properly in
your browser.
18
EN
u . e i t y u r e c n s s o m o t h w . w w
MOTORISED 1080P IP WI-FI CAMERA
Select the display language, then enter the username
and password for connecting to your camera. The
default username is admin and the password is left
blank, so you should leave the fi eld empty. At the
fi rst connection, the camera will immediately ask you
to replace the default username and password to
improve security:
When you have fi nished changing the username
and password, you will be asked to log back in.