jcm-tech BOX-DCS 1.0 Manual De Instrucciones página 16

• Pass the antenna through the bottom of
the box.
• Attach the circuit to the rear of the box.
• Pass the cables through the bottom of
the microreceiver.
• Slide the front of the microreceiver over
the track in the rear cover.
• Screw the antenna to the top of the chassis.
• Adjust the antenna.
• Possibility to adjust the antenna outside
the box.
• Do not position the active antenna less
than 5 metres away from another receiver
and/or active antenna.
CONNECTIONS
• If working in DC, the connection must be
1(+) and 2(-).
15