Numark PT01 Touring Guia Del Usuario página 4

Using PT01 Touring With Your Computer
Recording
To record music to your computer, you can use EZ Vinyl/Tape Converter. EZ Vinyl/Tape Converter,
numark.com/ezvc, conveniently saves your recordings to your computer. After you finish converting your
vinyl, you can then burn to CD or load onto portable media devices.
Locate the EZ Vinyl/Tape Converter installation card in the box to download and install the software.
1. With EZ Vinyl/Tape Converter installed on your computer, use the included USB cable to connect PT01
Touring's USB port to an available USB port on your computer.
On your computer, you can open EZ Vinyl/Tape Converter by going to Start Menu  All Programs
2.
(Windows) or the Applications menu (Mac).
3. Follow the on-screen instructions to set up your recording. When prompted to play your music, move
PT01 Touring's tonearm over the record to start playback.
Note: To listen to a record while it's playing, listen through your computer's speakers, or connect PT01
Touring's RCA outputs to a stereo system or powered speakers. Do not connect them to phono-level
inputs; PT01 Touring's RCA outputs are line-level and could damage a device with phono-level inputs.
4. When you have finished recording, raise PT01 Touring's tonearm from the record and return it to its
arm clip.
Visit numark.com/kb/article/1424 for more information on optimizing your computer for audio.
Playback
There are 3 ways to listen to your vinyl records with PT01 Touring:
1. You can simply listen to your music using PT01 Touring's internal speakers.
2. If you prefer to use your own stereo speakers, you can connect PT01 Touring's RCA outputs to a
stereo system or to powered speakers. Do not connect them to phono-level inputs; PT01 Touring's
RCA outputs are line-level and could damage a device with phono-level inputs. (Any other standard
input type, such as CD, Aux In, or Tape is acceptable).
3. You can listen through your computer speakers or with headphones connected to your computer,
once your computer soundcard's input device has been set to USB PnP Audio Device or USB Audio
Device, depending on your Windows operating system (USB PnP Audio Device on Mac OS X) and that
you are record-monitoring the audio using EZ Vinyl/Tape Converter or similar software (PT01 Touring
cannot be used as a playback device for your computer's audio.). See the section Setting Your
Computer's Soundcard as the Default Playback Device for details on how to configure sound playback.
4