Complete The Installation; Accessing The Axis 209Fd/Mfd From The Internet - Axis Communications 209FD Installation Guide

AXIS 209FD//MFD Installation Guide

Complete the installation

1. Clean the dome with a dry soft
cloth to remove dust and finger-
prints and use a blower to remove
any dust from the lens.
2. You can replace the cover in
either of these two ways:
• Replace cover and gently
tighten the tamper-proof
screws by hand using the
supplied allen key.
• Replace cover and tighten
the tamper-proof screws
with torque screwdriver
(torque<0.4 Nm).
The installation is now complete.

Accessing the AXIS 209FD/MFD from the Internet

Once installed, your AXIS 209FD//MFD is accessible on your local network (LAN). To access
the camera from the Internet, network routers must be configured to allow incoming traffic,
which is usually done on a specific port. Please refer to the documentation for your router for
further instructions. For more information on this and other topics, visit the Axis Support Web at
www.axis.com/techsup
Affix dry bag here.
Page 13