Lens Adjustments - Axis Communications 209FD Installation Guide

Page 12

Lens adjustments

Position
To adjust the position of the lens, follow these steps:
1. Open the Live View page in your web
browser.
2. While checking the image in the Live
View page, move the lens to the desired
position.
Note:
The lens holder is designed to allow
the lens to be repositioned by hand.
Do not loosen the lens holder
screws.
Focus
The focus of the AXIS 209FD/MFD is set
at the factory from 0.5m to infinity. It
does not normally need adjustment.
To focus on objects closer than 0.5m, or if
for some reason the lens has lost focus,
this can be adjusted in the following way.
1. Loosen the lens lock screw.
2. Manually rotate the lens to adjust the
focus until the image on the Live
View page is satisfactory.
3. Gently retighten the lens lock screw.
AXIS 209FD//MFD Installation Guide
Lens holder screw
Do not loosen
Lens holder
Lens
Lens holder screw
Do not loosen
Lens lock screw