Static Rails Rack Kit Contents - Dell POWER EDGE 1950 Guia De Instalacion

Static Rails Rack Kit Contents

• One pair of static mounting rails with either VersaRails brackets or RapidRails brackets.
• One pair of chassis static rail modules
• 10-32 x 0.5-inch flange-head Phillips screws (8) (VersaRails kits only)
• Releasable tie wraps (2) (not shown in Figure 1-2)
NOTE:
The nonmetric screws described in illustrations and in procedural steps are identified by size and number
of threads per inch. For example, a #10 Phillips-head screw with 32 threads per inch is identified as a 10-32 screw.
Figure 1-2. Static Rails Rack Kit Contents
3
2
L
1 10-32 x 0.5-inch flange-head
Phillips screws (8)
(VersaRails kits only)
T
O N
F R
2 static mounting rails (2)
1
3 chassis static rail modules (2)
Four-Post Rack Installation
9