Zagg Flex Arc Instrucción página 5

CHARGING
When fully charged, your Flex Arc will deliver up to eight hours of audio
enjoyment per charge. Charging it is easy; here's how:
1. Connect the included micro USB cable to the port underneath the left
side of your Flex Arc.
2. Connect the USB end of the cable to your preferred USB outlet.
3. The LED will light red while your Flex Arc is charging. The LED will turn
off when your Flex Arc is fully charged.
4. Remove the micro USB charging cable and enjoy your Flex Arc for up to
eight hours.
EXTENDING AND RETRACTING THE EARBUDS
Your Flex Arc's earbuds extend and retract for a perfect fit every time or for easy
storage. Here's how to use and store them:
1. To extend the earbuds, grasp one earbud at a time and pull it slowly
straight out from its housing until it is your desired length.
2. To retract the earbuds, press and hold the Retract button for each earbud.
Note: The earbuds retract rapidly. To avoid potential injury either hold an
earbud and let it retract slowly, or avoid retracting the earbuds while the
Flex Arc is around your neck.
4