Malfunction Codes - HTW PACIFIC HTWCQ24PACIFICGN-K Manual De Usuario E Instalacion

14. MALFUNCTION CODES

The device displays sorne malfunctions and warnings on the LCD screen. (Fig.13) lf the
malfunction warning cannot be remedied by performing the specified process, in this case,
the nearest authorized service should be called and the malfunction related to the device
should be remedied.
MALFUNCTION
No flame warning
Flue gas sensor warning
Boiler water sensor warning
Tap water sensor warning
Fan warning - hail signal
Flue gas sensor over temperature warning
Low water pressure warning
Safety thermostat warning
High water pressure warning (only at min power)
Processor Eeprom error
Hea�ng return water sensor warning
Freezing Error
Fan encoder signal warning
Fan encoder signal - frequency range warning
Instant Flame detection warning
Flame detection circuit warning
Filled siphon alert
Gas valve recirculation warning
Flue gas overheating warning
Pump recirculation warning
MALFUNCTION CODE
E01
E02
E03
E04
E05
E06
E08
E09
E10
E13
E24
E25
E30
E40
E41
E42
E43
E44
E45
E46
Figure.13
28
PROCESS
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Check the water pressure
Perform RESET Process
Check the water pressure
Turn off and Turn on the boile r
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process
Perform RESET Process