.
f
Let the filters dry, then replace them into the body of the appliance.
g. Fix the air filter (14) with the screw (22) (fig.P).
Do not use the appliance unless the filters are properly installed. Do not
use the appliance if the filters are damaged or worn
4.1.c - Cleaning the reservoir
If the appliance is not going to be used for a long period of time:
a. Unplug it from the power outlet.
.
b
Rotate the hook (6) by 90° and slide out the reservoir (7) (fig.Q).
c. Rotate the catch lever (3) and remove the pump (4) from the reservoir (7)
(fig.R).
d. Completely remove the reservoir (7) from the body of the appliance.
e. Carefully clean and dry the reservoir (7).
f. Replace the reservoir in the body of the appliance and make sure the pump
(4) is positioned correctly; lock it in place with the catch (3).
g. Close the reservoir in the body of the appliance.
5 - BEFORE STORING THE APPLIANCE AT THE END
OF THE SEASON
• Clean the filters according to the instructions.
• Then, make sure they're dry and check that the water tank doesn't contain any
residual water.
• Place the appliance in its original packaging and store it in a fresh and dry envi-
ronment.
EN - 21