Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Focus 31131000 Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• As a standard, the product is equipped with an
EcoSmart (flow limiter). If a higher flow rate is de-
®
sired, the EcoSmart
®

Technical Data

This mixer series-produced with EcoSmart
limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
Test pressure:
The product is exclusively designed for drinking water!
4
may be dismantled.
max. 1 MPa
0,1 - 0,5 MPa
Assembly see page 6
English

Symbol description

(flow
®
1,6 MPa
1,6 MPa
Do not use silicone containing acetic acid!
Dimensions (see page 7)

Flow diagram

(see page 7)

with EcoSmart
®

without EcoSmart
®
Operation (see page 8)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Spare parts (see page 8)
Cleaning (see enclosed brochure)
Test certificate (see page 7)