SR SUNTOUR - OWNERS MANUAL
REMOTE LOCK
LEVER INSTALLATION
Mount the „Remote-Lock-Lever" on your
handlebar using a 3mm Allen key. After-
wards you can mount your brake and shif-
ting lever back on again.
Thread the cable through the outer casing
stopper and through the cover unit hole.
Tension the cable slightly and tighten it
using a 1.5mm Allen key.
Cut the cable to a proper length. Approxi-
mately 12mm is recommended.
Install a cable end cap at the end of the
cut cable using a needle nose pliers.
NRX / NCX LITE/ NCX / CR9
NCX / NCX LITE SERIES
3mm
1.5 Nm
1.5mm
CUT
12mm
9
English