Descargar Imprimir esta página

JUNO TC920LED Instrucciones De Instalación página 3

Carcasas empotradas comerciales con impulsador hi-lume de lutron (opción -l)

Publicidad

Idiomas disponibles

Idiomas disponibles

FIXTURE DIMMING
Lutron driver option for TC920LED, TC922LED and Chicago Plenum
and Emergency Options
Universal input voltage (120VAC thru 277VAC) housing consult Lutron
website for specific dimmer compatibility.
For use with Lutron Fluorescent 3-wire dimmers
Step 1. Properly ground fixture according to local and national electrical
codes and regulations.
Step 2. Connect the White wire from the LED driver to Neutral from the
dimmer.
Step 3. Connect the dimmed hot (not supplied) from dimmer to orange
port on LED driver.
Fixture
Ground
Step 4. Connect the Black wire in the J-box to the Switched Hot from the
dimmer.
Step 5. Connect the Green wire from the J-box to Ground of the fixture
and the power feed.
Step 6. Unused wires (Gray and Purple) must stay capped off.
Fixture
Ground
White (Neutral)
Orange (Dimmed Hot)
Black (Hot)
Gray
Purple
Fixture
Ground
White (Neutral)
Orange (Dimmed Hot)
Black (Hot)
Gray
Purple
1300 South Wolf Road • Des Plaines, IL 60018 • Phone 800-323-5068 • www.junolightinggroup.com
INSTALLATION INSTRUCTIONS
with Lutron Hi-Lume
V+ / Red
V- / Black
Figure 9
V+ / Red
V- / Black
Line Voltage
Class 2
Class 1 or Class 2
TC920LED & TC922LED
®
Commercial Recessed Housing
Fixture
Ground
For use with Lutron EcoSystem
Step 1. Properly ground fixture according to local and national electrical
codes and regulations.
Step 2. Connect the White wire from the LED driver to Neutral of the
power feed.
Fixture
Step 3. Connect the Black wire in the J-box to Hot of the power feed.
Ground
Step 4. Connect the E1 and E2 on the EcoSystem Digital Control Bus
to the purple and gray wire port on the LED driver.
Lutron Dimming Control
White (Neutral)
Step 5. Connect the Green wire from the J-box to Ground of the fixture
and the power feed.
Orange (Dimmed Hot)
Black (Hot)
Step 6. Unused wires (Orange) must stay capped off.
Gray
LUTRON
Yellow
Purple
Hot / Black
Neutral/White
Fixture
Ground
White (Neutral)
Orange (Dimmed Hot)
Black (Hot)
Ground
Gray
(Green)
Purple
To
Power
Feed
© 2014 Juno Lighting LLC
Driver (-L Option)
Controls
®
V+ / Red
V- / Black
Gray
Switched Hot (Black)
Dimmed Hot (Orange)
Neutral (White)
Ground (Green)
V+ / Red
V- / Black
To additional drivers
Switched Hot (Black)
Neutral (White)
Line Voltage
1
Class 2
Class 1 or Class 2
Ground / Green
Figure 10
To additional drivers
Rev 5/14
P3693
Lutro
Hot / Bla
Neutral/W
Purple
Hi-lum
1
To
Power
Feed
Orange
Hi-lum
1
E1 (Purple)
E2 (Gray)
pg 3 of 4

Publicidad

loading

Este manual también es adecuado para:

Tc922led