Protecting The Environment; Ec Declaration Of Conformity - Black and Decker BDS100 Manual Del Usuario

ENGLISH
The red LED indicator (2) will light up and the buzzer will sound
once while the tool is calibrating. After calibration is completed:
Slowly slide the tool in a horizontal direction. Make sure
x
not to tilt or lift the tool.
When the red LED indicator (2) lights up, slow down and
x
slide the tool further until the buzzer sounds and the top
green LED indicator is on.
This position indicates the one edge of the stud.
Mark this position using the centre of the tool as a
x
reference point.
Move the unit further until the LED indicators are off.
x
While still keeping the on/off switch (1) depressed,
x
move the tool in the opposite direction.
When the red LED indicator (2) lights up, slow down and
x
slide the tool further until the buzzer sounds and the top
green LED indicator is on.
This position indicates the other edge of the stud.
Mark this position using the centre of the tool as a
x
reference point.
The centre of the stud is between the two marks.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
4
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
At the end of their useful life, discard batteries with
due care for our environment.
Remove the batteries as described above.
x
Place the batteries in a suitable packaging to ensure that
x
the terminals cannot be short-circuited.
Take the batteries to a local recycling station.
x
Technical data
Voltage
Battery size
Operating temperature
Weight

EC declaration of conformity

Black & Decker declares that these products conform to:
EN 50144, EN 55014
Peter Holmes, Director of Engineering
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
BDS100
V 3
LR03
°C 0 - 40
kg 0.175
BDS100
Black & Decker, 56 Bai Yu Road
Suzhou Industrial Park
Suzhou, Jiangsu, 215021
1-12-2004