SANUS VuePoint FLF215 Manual De Usuario página 14

Insert three anchors C3 (Fischer UX 10 x 60 - included in the Concrete Installation Kit*).
3.
CAUTION:
Be sure the anchors C3 are seated flush with the concrete surface.
using three lag bolts C1 and three washers C2 (use only the lag bolts and washers from the Concrete Installation
4. Install wall plate
16
Kit*). Tighten the lag bolts C1 only until the washers C2 are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts C1 .
*
Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit shipped directly to you.
CAUTION:
Avoid potential personal injury or property damage! All lag bolts C1 MUST BE firmly tightened to prevent unwanted
movement of the wall plate
3
14
. Ensure the wall plate assembly
16
C3
Concrete Installation Kit CMK1 is not included
(see page 10) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
is securely fastened to the wall before continuing on to the next step.
16
4
C1
16 16 16
C2