DJI RONIN Guia Del Usuario página 5

1
2
Usage
1. When using the Ronin or Ronin-M, loosen the screws on either side of the Auxiliary
Power Adapter and slide it into the battery mounting plate, then re-tighten the screws.
Ensure the Auxiliary Power Adapter makes full contact with the gimbal's electrical leads.
Mount the Auxiliary Power Adapter into the top part of the gimbal in front of the pan
motor when using the Ronin-MX.
2. Connect one end of the provided power cable to the Auxiliary Power Adapter. Prepare
a plug (not included), then solder the red terminal of the power cable to the positive
pole and the black terminal to the negative pole.
3
1. Thumb Screws
2. Power Port
3. Power Button
Black Terminal
Red Terminal
© 2017 DJI All Rights Reserved.
3