Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Timberkits Pianist
Resumen de contenidos para Timberkits Pianist
- Página 1 Pianist...
- Página 2 (DE) Lesen sie alle anweisungen und betrachten sie die schaubilder see this symbol. (UK) Check assembly before gluing www.timberkits.com (FR) Vérifier le montage avant collage (ESP) Controlar el montaje antes de empezar a pegar (IT) Controllare l’assemblaggio prima di incollare (DE) Montage prüfen vor dem einklebern...
- Página 3 Or visit our website for tips, advice and instructional videos. All these can be found in Resources/Advice Videos on our website.
- Página 4 37 x2 24 x2 5x108mm...
- Página 5 12 x2 12 x2 12 x2 12 x2 12 x2 11 x2 11 x2 38 x2 39 x3 40 x2 39 x3 3mmx24mm 3mmx24mm 3mmx36mm 3mmx36mm 3mmx40mm 3x76mm 3mmx92mm 3mmx114mm 6mmx25mm 5mmx32mm 5mmx114mm 6mmx147mm...
- Página 6 35 & 36 33 & 34 2 x2...
- Página 7 Parts 4 and 5 used for aligning part #2 only at this stage. 10mins 5mmx114mm 3mmx114mm 20mins 5mmx108mm...
- Página 8 6 (x16) Sand any rough pieces from around the hole on each piano key before sliding onto the 3mm x 114mm bamboo. 5mmx32mm...
- Página 9 3 cont 6mmx147mm 6mmx25mm 10mins Round off outer edge of part #13 and then wax before using...
- Página 10 10mins 11 11 12 12 12 12 12 11 13 12 12 12 12 12 11 11 Push all cams to one side and move and glue one at a time above a corresponding key. Vary the position of the flat sides of the No.
- Página 11 Glueing sequence Attach parts 14, 15 and 16 to the back of the piano whilst the glue is still drying so that you can adjust to fit. 10mins 20mins 10mins...
- Página 12 20mins 3mmx12mm 3mmx12mm 3mmx24mm 3mmx36mm...
- Página 13 10mins 10mins 3mmx12mm...
- Página 14 20mins...
- Página 15 13cont 3x36mm 3mmx76mm This will be glued in place finally on page 17. Sand and wax each finger and thumb. 2mmx12mm 2mmx12mm 2mmx25mm 2mmx25mm...
- Página 16 10mins 10mins 10mins Ensure Part No. 32 runs inline with the piano keys and is positioned in front of cam No. 13.
- Página 17 3mmx12mm 3mmx12mm 20mins 20mins Glue the arms in place so that the fingers are resting completely flat on the piano keys. 3mmx24mm...
- Página 18 Twist the head to a jaunty angle whilst glue is still drying. 3mmx15mm 3mmx40mm Glue part No. 45 onto the 11th key from the handle end. When glue is dry check keys either side are not glued to the 11th key. 3mmx12mm 20mins...
- Página 19 (21b) Whilst glue is still drying on 3x76mm rod turn the model the right way up and carefully turn the handle. The pianist should raise his hands up from the keyboard by about 10mm. Adjust 3x76mm rod in and out of part No 31 to suit.
- Página 20 3mmx92mm...
- Página 21 Notes...
- Página 22 Notes...
- Página 23 (UK) If you enjoyed building this model why not try our others. Available directly from Timberkits Ltd or from our UK, European or worldwide retail partners. Check our website to find your nearest stockist. (FR) Si vous avez apprecie construire ce modele, pourquoi ne pas en essayer d’autres. Ils sont disponibles chez Timberkits Ltd ou chez nos partenaires detaillants au Royaume Uni, en Europe et plus largement dans le monde.
- Página 24 Timberkits Limited Old Village Hall Llanbrynmair Powys, SY19 7AA 00 (44) (0) 1650 521635 timber_kits@btconnect.com www.timberkits.com Timberkits logo and all Timberkits designs are Copyright (©) 2012 all rights reserved.