Inspection & Maintenance; Maintaining Weather Resistance; Recommended Tools - Bose Professional ArenaMatch Guia De Instalacion

Tabla de contenido

Publicidad

PRO.BOSE.COM
Inspection & Maintenance
WARNING: The loudspeaker and all mounting components must be inspected annually by a qualified
professional who is trained and certified in suspending loudspeaker systems. All rigging parts and
components used in the suspension of the loudspeaker system should be visually inspected for signs
of cracking, bending, water damage, corrosion, de-lamination, or any other condition that could
compromise the system's integrity and create a dangerous falling hazard.
WARNING: The M6 and M10 threaded inserts are made of stainless steel. Exposure to chlorine could
cause corrosion of the M6 and M10 threaded inserts that may not be detected through an annual
inspection, creating a dangerous falling hazard. Therefore, do not suspend ArenaMatch loudspeakers
using the M6 and M10 stainless steel inserts in environments where chlorine is present, such as indoor
pools, indoor water parks, hot tub rooms, saunas, and steam rooms.

Maintaining Weather Resistance

ArenaMatch loudspeakers are rated for direct-exposure outdoor installations. To maintain weather resistance,
please observe the following precautions:
1.
Before, during, and after installation, check the surface of the loudspeaker enclosure to ensure that the
factory-applied, weather-resistant coating has not been damaged.
2. During install, angle the loudspeaker at least 5° downward to reduce the potential of rain compromising the
performance of the loudspeaker.
3. All mounting holes must be sealed off with steel screws (included with applicable accessories) or the
included plastic plugs (pre-installed).
4. The gland nut that secures the loudspeaker cable is factory sealed. Do not remove the gland nut or the
weather-resistant seal will be broken.
5. The loudspeaker is rated for direct-exposure installations, which means the grille is designed to withstand
normal and wind-driven rain. The grille is not designed to withstand direct spraying of water from a hose or
pressure washer.
CAUTION: If the above instructions are not observed, the weather-resistant integrity of your
ArenaMatch loudspeaker could be compromised.
For fire and evacuation notification applications, environmental rated to IP33C per EN 54-24.
For general purpose audio installation applications, environmental rated to IP55 per EN60529.

Recommended Tools

The following tools are recommended for assembly of an ArenaMatch loudspeaker array:
Flathead screwdriver
#2 Phillips-head screwdriver
18-millimeter socket or wrench
14-millimeter socket or wrench
5-millimeter hex key
Installation Guide • ArenaMatch DeltaQ Array Loudspeaker
Overview
English • 13

Publicidad

Tabla de contenido
loading

Tabla de contenido