Adjusting The Seat Angle; Removing The Child Safety Seat - tuctuc spire I-SIZE Intrucciones De Uso

ADJUSTING THE SEAT ANGLE

The seatshell can be used in four different reclined positions facing either forwards
or backwards: To adjust the seat angle:
Pull the adjustment handle forwards and push slide the seat shell into the desired
position . DANGER! The seat shell must engage securely with a clicking sound
regardless of its position. Pull up on the seat shell to ensure that it is engaged.

REMOVING THE CHILD SAFETY SEAT

Press the two adjustment buttons on the support leg and push the bottom part of
the support leg into the top part until it is fully inserted. Release the adjustment
buttons to fix the support leg in the inserted position.
Loosen the ISOFIX fastening on both sides by pressing the green safety button and
the red release button towards each other.
Move the ISOFIX locking arms back into the seat shell .
TIP ! The ISOFIX locking arms are protected against damage once they are pushed
back into the seat bottom.
DANGER! The child safety seat must always be secured when it is in the vehicle, even
if no child is being transported.
81