SOLAC CP7320 Instrucciones De Uso página 17

CP 7320.book Page 17 Wednesday, December 19, 2007 11:51 AM
Final touch (Fig. 6)
• To get a straight line on the sideburns and around the ears, remove the
guide comb and place the clipper in the inverted position at a right angle
to the head, with the blades in contact with the skin, and move the clipper
downwards.

When the clipper is used without the guide comb, it cuts hair flush to the
skin. Be careful not to injure your skin.
5 Cleaning and upkeep

Do not use solvents, detergents or abrasive products.
1 Unplug the appliance.
2 Use a dry cloth to clean the outside.
3 Clean the cutting blades (6) using the supplied cleaning brush (17).
Remove the blades as shown in Fig. 7.
4 After each use, lightly lubricate the cutting blades (6) with the lubricating oil (18).
Storage
• When the appliance is not being used, unplug it and store it in a cool, dry
place.
• To prevent the cable from becoming damaged, do not twist it, pull it or
wind it around the appliance. If it is damaged, have it replaced
immediately by qualified personnel.
6 Recycling

When you decide to dispose of the appliance, you must first remove the
batteries as described below.
1 Unplug the appliance and turn it on until the batteries are completely
discharged.
2 Remove the batteries and deposit them in an appropriate container.
r The batteries used in this appliance are Ni-MH batteries, therefore
they must be recycled or disposed of according to local laws and
regulations. NEVER throw batteries in containers for household rubbish.
3 Deposit the appliance in an appropriate container.
q
IMPORTANT: When you want to dispose of the appliance, NEVER
throw it in the rubbish bin. Take it to the CLEAN POINT or waste
collection centre closest to your home for processing. You will thus be
helping to care for the environment.
Cleaning and upkeep
en
17