Extel WESV 82400 Instrucciones De Uso E Instalación página 130

CH1
O
CH3
Note that in QUAD mode, the « OK » key is not activated. First you should exit the QUAD
mode by pressing q, p , t or u .
g- Setting screen
Press the "OK" key a menu appears:
- Adjustment of the brightness
- Setting the format of the video output (A/V output)
10GB
(Reminder: only the cameras in viewing mode "ON" will
CH2
be visible.)
The camera 1 in the left upper corner of the screen CH1
The camera 2 in the right upper corner of the screen CH2
The camera 3 in the left lower corner of the screen CH3
The camera 4 in the right lower corner of the screen CH4
Black screen for the cameras non-connected or not
CH4 activated (OFF).
« menu system setup »
With the q key of the monitor go to the menu:
"System Setup" and press « OK ».
A new menu appears.
Use the t and u keys of the monitor to increase or
decrease the brightness.
Still in the menu "System Setup", press the q key to
access the TV out menu:
Modify video format.
Parameterize the video format with the t and u
keys according to the format accepted by the ap-
pliance connected to the No 11 A/V output of the
monitor.
CFI EXTEL WESV 82400 - 06/2009 - V1