Lenze CS 5000 DVI Instrucciones Para El Montaje página 30

4 Installation
Mounting steps
Fixing the mounting frame to the support arm
With add−on component

1
„
How to proceed:
1. Check support arm system for professional mounting and sufficient
carrying capacity.
–
See support arm documentation.
2. Stick the self−adhesive seal 0 on the adapter plate 1 on the side with the
threaded bolts.
3. Pull the connecting cables 2 out of the support arm 3 and screw the
adapter plate 1 to the support arm 3.
–
For screws see support arm documentation.
4. Screw the add−on component 4 to the threaded bolts of the adapter plate
1.
4 spacer bolts 5 on the inside/outside M5 x 20 mm
–
5. Stick the second self−adhesive seal 0 on the add−on component 4.
6. Screw the mounting frame 6 to the add−on component 4.
4 nuts M5 with washers Æ 5.3 mm
–
4 screws M5 x 8 mm with washers Æ 5.3 mm
–
Now you can connect the Command Station (¶ 33).
30
3 1
‚
0
2
4 4
0
…
4
1
ƒ
5
6
l
CS57x0−006
MA_CSx0xx DE/EN/FR/ES/IT 2.0