Twin-Star International 18MM3207 Manual De Instrucciones Adjunto página 4

2. Locate Hearth/Base (A) and set out fi nished
side up on the fl oor.
3. Locate Center Left Side Panel (B), and insert
one Wood Dowel (N) into each of the
pre-drilled holes. Then use Bolts (L1) and
Washers (M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
4. Locate Center Right Side Panel (C), and insert
one Wood Dowel (N) into each of the
pre-drilled holes. Then use Bolts (L1) and
Washers (M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
5. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
6. Then locate Center Shelf (H) and lay fi nished
side up on top of Completed Assembly from
step 4. From the inside, attach the Center Shelf
using Bolts (L1) and Washers (M) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-3
N
N
A
N
Hearth/Base
Center Shelf
H
N
L1
M
L1
M
N
N