Scanning Mode; Cleaning And Storage; Memory Function; Switching The Sound Off - Alvita 6301838 Manual Del Usuario

Step 6
The device will automatically shut off if unused for more than 1 minute, to maintain
the battery life. Alternatively press the grey
seconds to turn the device off.

Cleaning and Storage

The probe is the most delicate part of the thermometer. Care should be taken when
cleaning the lens, to avoid damage.
1. A cotton swab dipped in Alcohol (70% concentration) should be used to clean
the lens.
2. Allow the probe to dry for at least 5 minutes. Keep the device dry and away from any
liquid and direct sunlight. The probe should not be submerged into liquids.

Memory function

If the measurement is within the range 34°C to 42.2°C (93.2°F to 108°F), the
measurement is saved to the memory.
The thermometer stores 9 recent measurements in the memory.
To review the measurements in the memory:
1. Turn the device on.
2. Press the grey
measurements stored.

Switching the sound off

1. Turn the device off.
2. Hold down the blue
grey
3. Press the grey
release the button.
4. Use the same process to turn the sound on.
6
12367-MULTI INFRARED THERMOMETER BOOKLET ES, FR, DE, IT, ES, PT V1AW.indd 6
"ON/OFF/Memory" button again, to display the
"Temperature" button, then press and hold the
"ON/OFF/Memory" button until the LCD shows °C. Release both buttons.
"ON/OFF/Memory" button again to switch the sound off, then
"On/Off Memory" button for at least 3
28/03/2019 15:36