Thermon PETK-1 Instrucciones De Instalación página 4

End Termination Instructions
E1.
Cut and remove overjacket.
E2.
Push back braid onto overjacket.
E3.
Cut V-notch into end of cable.
E4.
Apply a liberal amount of RTV sealant to cable and inside
end cap. Slide end cap onto end of cable.
E5.
Apply a liberal amount of RTV sealant to end cap and inside
overcap. Slide overcap onto end of cable.
3 Power and End Termination Cable Take-off 4