Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION MANUAL
KCPROXWLC
Dual Technology Digicode
1] PRODUCT PRESENTATION
Dual technology:
- Proximity reader,
- Digicode
keypad.
®
Output formats:
- Wiegand,
- Standard format,
- ISO Track 2 format.
Stainless steel.
Narrow: Ideal for installation
on aluminium profile.
Backlit.
Recommended for activating
and deactivating your alarm system.
Audible and visual feedback.
Power supplies: 12V dc.
Consumptions: 120mA.
2] NOTES & RECOMMENDATIONS
Operating modes
CENTAUR :
3 operating user modes with CENTAUR:
- Digicode
keypad only,
®
- Proximity reader only,
- or dual security (Proximity reader + Digicode
The operating mode is programmed on Centaur software.
TERENA:
There are only 2 operating modes possible
on TERENA:
- Digicode
keypad,
®
- Proximity card reader.
Program the proximity card or the pin code
on TERENA software.
Cable
- Programming your installation before installing
products on site.
- The distance between a CTV900A (CENTAUR) controller
or AC22 (ATRIUM) controller and a KCPROXWLC
should not exceed more than 150 meters.
- Make sure not to exceed 50 meters between
the INTBUSW reader interface and the KCPROXWLC
Pin/Prox Digicode
.
®
cdvi.com
16
cdvigroup.com
/Proximity reader
®
- Make sure that the cable is not near by a high
voltage cables (ex: 230 V AC).
- Recommended cable 2 twisted pairs (4 wires)
SYT1 0.8MM.
Back EMF protection
keypad).
®
To secure the system from back electromagnetic
fields do not forget to mount the varistor in parallel
on the lock terminals.
Security Advice
- For security reasons, change the factory default
master code.
- When selecting a master code and user code
avoid simple codes (example : 3 4 5 6 7).
Mounting recommendations
Mount the keypad on a flat surface to avoid
any vandalism and to insure the best mounting.
Power Supplies
Recommended power supplies: ARD12 or BS60.
These products must be powered in 12Vdc and the
power supply should be certified EN60950-1:2006/
A11:2009 standards and should be designed to be
a low power supply source.
EN
CE Certification
IP64
Environmental tests:
vibrations
-25°C à +60°C
WEEE & RoHS
Publicidad
Tabla de contenido
