peerless-AV SGLS01 Manual De Instalación página 10

Mounting and Removing Flat Panel Display
WARNING
• Always use an assistant or mechanical lifting equipment to safely lift and position the display.
Hook adapter brackets (G) onto universal plate (F), then slowly swing display in as shown. Turn screws clockwise
14
at least six times to prevent display from being removed as shown in detail 4.
NOTE: Tighten using 4 mm allen wrench (R).
Display can be adjusted horizontally if desired.
NOTE: It is important to lock display down! To lock the display down, tighten screws to adapter bracket as
shown in detail 4.
To remove display from mount, loosen screws, swing display away from mount, and lift display off of mount.
F
SCREWS
G
DETAIL 4
G
10 of 35 ISSUED: 07-28-06 SHEET #: 202-9156-15 (2014-04-09)