Sleep Mode - Gemini DJ ICFX Guia De Inicio Rapido

Reproductor profesional efx de cd

Ocultar thumbs

Contenido

página de 22

/ 22
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

the internal memory. This enables the DJ to scan quickly to a starting point

for easier mixes during a live session.

To store this cue point follow the steps to store a cue point.

Once you are satisfied with your cue point, press & hold the M

(12) button for two seconds in order to store this cue point. If you are not

satisfied with this cue point repeat the steps to store a cue point.

Your cue is now saved & can be recalled at any moment long after you

have stopped playing with this CD. You will notice the A

flash in the LCD (16) once this cue point has been saved successfully.

The cue point has now been stored in the memory of the iCFX or CFX-

20 and can be recalled in P

mode. You will notice the A

AUSE

blinking indicating that the iCFX & CFX-20 recognize a stored cue point

on the CD. Simply scroll to any track that has a cue point stored. Press &

hold the B

(23) knob until the cue point appears on the

RAKE

ECALL

LCD screen. Press play & the stored cue point will start from that point.

SEAMLESS LOOP:

Press the L

(17) button to enter an entry point into the

OOP

memory, & the L

's (17) LED will blink rapidly while memo-

OOP

rizing the loop entry point into the memory.

After an entry loop point is memorized, press L

to complete the loop. The unit will automatically repeat the section

between the loop's entry point, programmed with the pressing of the L

(17) button, & a second exit loop point, when the L

ton is pressed. The loop is now programmed into the unit's memory.

While playing the loop, both the L

(17) & L

OOP

blink to indicate that the loop is in use. You will notice the LCD (16) will

also indicate that the L

is in use with a blinking C

OOP

remain steady once the loop has been stopped.

Press the R

(19) for the unit to return to the previously set loop.

ELOOP

__________________________________________________________________________________________________________________________________________________

___________________________________________________________________________For Your Records Serial #:

Press the R

ELOOP

(19) function automatically returns the music to the loop point &

ELOOP

will play the loop until it is released with the L

Press the B-E

EMO

TORE

. When pressing B-E

OOP

the L

OOP

(22), by turning the wheel left or right examining frame by frame while the

loop repeats itself. You should be able to hear the difference in each frame

LED will

UTO

until you are satisfied with your loop exit point. Press B-E

you are satisfied with your exit point & your loop will continue to play until

you press L

OOP

LED

UTO

To exit the loop & resume play, press L

continue play from the point where the loop ends.

SLEEP MODE:

The iCFX & CFX-20 feature a default S

the unit recognizes that it has not been in use for some time. This feature

simply shuts O

capabilities. You will notice the LCD (16) reads S

activated. To deactivate this default mode, begin play & the unit will "wake

up" to play music once again.

(18) in play mode

OOP

TROUBLESHOOTING:

· If the disk will not play, check to see if the disc was loaded correctly

OOP

(18) but-

(label side up). Also check the disc for excessive dirt, scratches, etc.

OOP

· If the disc turns but there is no sound, check the cable connections. If

(18) LEDs will

they are okay, check your amplifier or receiver.

OOP

· If the CD skips, check the CD for dirt or scratches. Do not assume that

-B icon that will

the CD player is defective. Many CDs are recorded out of spec & will skip

on most or all CD players. Before sending the unit in for repair, try playing

a CD that you are sure plays properly.

(19) repeatedly for stuttering the loop entry point. The

(18) button.

OOP

(20) button to edit the loop created by your S

DIT

(20), the LCD (16) will read the frame where

DIT

(18) is set. You may adjust it with the use of the J

(18).

(18) to stop the loop &

OOP

mode that activates itself when

LEEP

the laser to increase the longevity of the unit's playing

when this mode is

LEEP

NOTES:

SPECIFICATIONS:

ENERAL

Type........................................Single Mechanism Compact Disc Player

Disc Type...................................Standard Compact discs (12cm, 8cm)

EAMLESS

Time Display.............Track Elapsed, Track Remain, or Total Remain

Variable Pitch..........± 4%, ± 8%, ± 16%, + 100% Slider with Resume Switch

HEEL

Pitch Bend......................................................................± 4% Maximum

Instant Start..........................................................Within 0.015 seconds

(20) when

Track Selection........................................................................1 to 99 Tracks

DIT

Dimensions......................................8 1/2" W x 3 3/4" H x 12 1/2" D

.....................................................................................(216 x 95 x 320 mm)

Weight.............................................................Player Unit 6.62 lbs (3 kg)

UDIO

ECTION

Quantization.........................................1 Bit Linear/Channel, 3 Beam Laser

Oversampling Rate......................................................................8 Times

Sampling Frequency...................................................................44.1 kHz

Frequency Response.....................................................20 Hz to 20 kHz

Total Harmonic Distortion........................................Less Than 0.05%

Signal to Noise Ratio.......................................................................90 dB

Dynamic Range...........................................................................< 80 dB

Channel Separation...........................................................88 dB (1 kHz)

Output Level..................................................................1.3 Volts R.M.S.

Power Supply...................................................AC 115/230 V, 60/50 Hz

Tabla de Contenido

Tabla de contenido

Este manual también es adecuado para:

Cfx-20