Teach-In Multi-Io Box To Several Base Stations; Teach-In To Alpha Ip Access Point; Displays - Alpha IP MIOB 21001-XX Manual Del Usuario

Displays

7.1.1 Teach-in Multi-IO box to several base stations

For a teach-in of a Multi-IO box to several Alpha IP base stations, the base stations (max. 7) must be
coupled to each other first.
1. Press the System key (A) of the first base station for 4 seconds, until the LED of the System key flash-
es rapidly in orange.
9 The teach-in mode is active for three minutes.
2. Press the System key (A) of the second base station for 4 seconds.
The LED will light up in green after a successful teach-in process. The process must be repeat-
ed if the LED lights up in red.
9 The base stations are coupled.
3. The Multi-IO box can now be taught-in to the heating zones of the second base station.

7.2 Teach-in to Alpha IP Access Point

For a control via the Alpha IP app, the teach-in of the Alpha IP Multi-IO Box must be performed via the
Access Point (HAP 21001). Teach-in the device as follows:
Ö The Alpha IP Access Point has been set-up via the Alpha IP app (see manual HAP 21001).
1. Open the Alpha IP app on your smart phone.
2. Select the menu item Teach-in device.
3. Press the System key (A) shortly until its LED flashes slowly in orange. The teach-in mode is active
for three minutes.
9 The device will be displayed automatically in the Alpha IP app.
4. For confirmation, enter the last four digits of the device number (SGTIN) or scan the supplied QR
code. The device number can be found below the supplied QR code or directly on the device.
The System key LED will light up in green after a successful teach-in process. The process must
be repeated if the LED lights up in red.
5. Follow the directions of the app.
8 Displays
Display
Short flashing,
orange
1 long lighting,
green
Short flashing, or-
ange (once every 10
seconds)
24
Meaning
Radio transmission/
transmission attempt/
data transmission
Process confirmed
Teach-in mode active
Solution
Wait until the transmission has ended.
You can continue your operations.
Enter the last four digits of the serial number of
the
device for confirmation.