Other Useful Information - Kitchen Living CM2001T Manual Del Usuario

12 cup programmable coffee maker

Other useful information

Cleaning and maintenance
CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical
shock, do not immerse cord, plug or unit in water or liquid. After each use,
always make sure the plug is removed from the wall outlet.
1. Clean all detachable parts after each use in warm, soapy water.
2. Wipe the product's exterior surfaces with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the area above the funnel and drip onto the product
base during brewing. Wipe off the area with a clean, dry cloth after each use of the
product.
4. Wipe the warming plate with a clean, damp cloth. Never use rough, abrasive materials
or cleaners on the warming plate.
5. Replace all parts and keep ready for the next use.
Removing mineral deposits
From time to time, you may need to clean off any mineral deposits (limescale) left by
•
water inside your coffee maker to keep it operating efficiently. How often you have to
do this depends on the water hardness in your area and on how often you use the
machine.
You can use a commercially available descaling agent for household products
•
(according to the instructions on the packet) to descale the coffee maker, if the
product is recommended for use in an automatic coffee maker. Or simply use a
water and vinegar mixture and proceed according to the steps below.
1. Fill the water tank with water and descaler to the MAX level in the gauge of coffee
maker (the scale of water and descaler is 4:1, the detail refers to the instruction of
descaler. Please use "household descaler", you can use the citric acid instead of the
descaler (the one hundred parts of water and three parts of citric acid).
2. Place the carafe on the heating plate and align the carafe with the center of the
brewing basket.
3. Press the On/Auto/Off button once and the brew indicator will be illuminated red.
After a while, water will drop out automatically.
4. After percolating the equivalent then switch off the appliance by pressing the On/
Auto/Off button again. The brew indicator will be extinguished.
5. Let the solution work 15 minutes then repeat steps 3-5 again.
6. Turn the appliance on by pressing the On/Auto/Off button once and run off the water
until the water tank is completely empty.
7. Rinse by operating the appliance with water at least 3 times.
8. When the cycle is completed turn the coffee maker off.
AFTER SALES SUPPORT
866-235-5029
USA
MODEL: CM2001T
Other useful information
mp656@messageplex.com
PRODUCT CODE: 44669
USA
10
03/15