Led Display Notifi Cation - Amplicom TCL200 Guia Del Usuario

5. Press the Increase/Decrease Value button as needed to set the alarm period,
and then press the Set Alarm Time button. The alarm clock will announce
the complete alarm setting. The alarm volume/acoustic/pitch settings are
available in case of the alarm on/off switch is ON and alarm period switch is
setting to 1 or 2 but not period 1+2.

LED Display Notifi cation

Vibration Pad
The following functions are on the vibration pad:
Flashing Green Every 2 Seconds: Vibration pad is on.
Red: Vibration pad is charging.
Flashing Red: Battery charge is low.
1-866-AMPLICOM (267-5426)
G G
ETTING STARTED ETTING STARTED
11