D-Link ANT24-0802 Guía De Instalación Rápida página 4

4. Mounting the Antenna (optional)
A.Wall Mounting:
Step 1: Identify a mounting location and place the
sticker on.
Step 2: Use a 4/16"drill bit to drill holes at 2 marked
places on sticker.
Step 3: Tap the plastic anchors gently into the hole by
using a rubber mallet or hammer.
Step 4: Use a screwdriver to secure the screws into
the plastic anchors. Be sure to leave enough
space so the antenna base will slide over the
head of the screw.
Step 5: Place the antenna base over the screw and
slide it into the locking position.
B.Magnetic Mounting:
Step 1 : Identify a mounting location which is available
for magnetic using.
For example: Office partition, white board, etc.
Be sure not to place antenna onto monitor, hard disk,
notebook, etc.
C.Desktop:
4
D.Attach to AP/Router:
D-Link ANT24-0802 Quick Install Guide