Installing The Looky 5; Instructions For Charging - Rehan Electronics Looky5 Manual Del Usuario

5. Installing the Looky 5

Connect the battery handle of the Looky 5 by sliding it onto the
connector until you hear it clicking into place. This battery handle
also functions as the Looky5's handle.
To replace the battery handle push the 2 purple battery release
buttons on the side of the battery handle, and slide on the
replacement battery handle.
Charge the battery handle completely before using the Looky5.
Please read the charging instructions carefully.

6. Instructions for charging

Put the adaptor in the wall socket and connect its plug to the
charging adaptor port of the Looky5.
LED burning constantly
LED off
LED blinking
Charge the batteries in a well ventilated environment. Remove
the Looky 5 from its carrying case when charging. Don't place it
in direct sunlight or near a radiator whilst charging.
When the battery is empty, the Looky 5 will switch itself off. You
will hear a high pitched tone that fades away.
batteries are being charged
batteries are fully charged
error / batteries are defect
7