Switching The Looky 5 On Or Off; Focusing The Looky 5; Far View Function; Switching Off The Led - Rehan Electronics Looky5 Manual Del Usuario

9. Switching the Looky 5 on or off

To switch the Looky 5 on, press the ON/OFF button once. You will
hear a scaled sound increasing in pitch.
To switch the Looky 5 off, press the ON/OFF button for 3 seconds.
You will hear a scaled sound decreasing in pitch.
When the Looky 5 is switched on, and it doesn't detect
any movement on the screen, it will switch itself off after
3 minutes. A two-pitched signal will be heard.

10. Focusing the Looky 5

The Looky 5 uses a push-to-focus method to focus the image on
the screen. Simply touch the screen on the section where you
want the Looky 5 to focus; the camera will focus on that area.

11. Far View function

The camera of the Looky 5 can focus on objects from 5 cm.
distance to infinity. Just hold the device up to view the object.
Remember to touch the screen in order to focus the camera on
the object you are viewing.

12. Switching off the LED

By touching the centre of the screen for 1 second you can switch
off the LED at the back of the Looky5. You will hear a beeping
sound indicating that the LED is switched off.
Touch the centre of the screen again for 1 second to turn the LED
back on. Another beeping sound will be heard.
9