Installation
Instructions
WARNING
Explosion Hazard
these instructions.
The pressure regulator and the burner orifices are
factory set for natural gas. To operate the rangetop
WARNING
TOOLS YOU WILL NEED FOR
CONVERSION
1
ORIFICE HOLDER
The rangetop orifice holder
is attached to the under side
of the rangetop near the gas
inlet.
orifices specified in the
instructions for your rangetop.
Conversion to Propane (LP) or Natural Gas
Grill
Griddle
Orifice
Orifice
2
CONVERT THE REGULATOR
access the regulator.
The rangetop regulator is
on the left bottom corner.
desired gas is
bottom.
onto the regulator.
3
CHANGE BURNER ORIFICES
INSTALLATION TIP:
all orifices and then start replacing
possibility that some may not be
replaced.
burner caps and burner heads.
small pliers to carefully lift out
the orifices.
The main orifice is
orifice is located
higher beside the
center of the burner.
Rangetop Regulator
Cap
NAT
LP
NAT
LP
head
igniter
Orifice
Orifice
31-11127