Before You Begin - D-Link mydlink DCH-S150 Guía De Instalación Rápida

INTrODUCTION
automate your connected home devices wirelessly using a pIR motion detection
sensor with the d-link dcH-s150 mydlink™ Wi-Fi motion sensor. With the
dcH-s150, you can automatically turn on devices attached to d-link smart
plugs wirelessly throughout your home. also, you can stay updated with instant
notifications to your mobile device while you're away from home.
Internet
SAFetY
For your safety, please read the following precautions before installing or using
your dcH-s150:
1. do not open the device or attempt to repair or service it.
2. use the device in a dry location, and avoid placing it in a humid environment.
3. do not submerge the device in liquid or attempt to clean it with liquids or solvents.
to clean the device, disconnect it from the power outlet and use a damp towel.
4. this device should only be used indoors.

BeFore YoU BeGin

To make sure your DCH-S150 operates as intended, please read the following
suggestions:
1. plan the location of your motion sensor:
2. connect your motion sensor into an electrical outlet that is not controlled by a
wall switch. this will help you to avoid accidentally turning off power to the device.
3. Verify that your motion sensor is facing an open area, free of obstructions.
4. Verify that your motion sensor is electrically rated to operate with the power
available in your location.
DCH-S150
router
Smart Plug
DCH-S150
Smartphone
with mydlink™
Home app
3