Control Panel - Smarter tools GP Serie Manual Del Propietário

9000 Generator
Controls and Features (cont'd)
_________________________________________________________________________________________________

Control Panel

1.
1
1. Engine Switch – Used to turn on and off the
engine. For electric models it is also used to
start the engine.
2. Hour/Voltage/Hertz Meter – Measures the
number or hours the engine has run, as well as
the amount of voltage and hertz in use.
3. Circuit Breakers – Protects the generator
against electrical overload.
4. 120V 20A Duplex – This duplex is protected by
a 20 A circuit breaker. Use this duplex to
operate 120 volt AC, single phase, 60 Hz loads
requiring up to 20 A or 2400 Watts of power.
5. 120V 20A Duplex – This duplex is protected by
a 20 A circuit breaker. Use this duplex to
operate 120 volt AC, single phase, 60 Hz loads
requiring up to 20 A or 2400 Watts of power.
2
©2011 Smarter Tools, Inc. All Rights Reserved
6. 120/240V 30A Twist-Lock – Protected by a 30A
circuit breaker on each 120 Volt leg of the
receptacle. This receptacle powers 240 Volt AC,
60 Hz, single phase loads requiring up to 30A or
7200 Watts of power. If an L14-30P plug is wired
for only one 120 Volt leg (3-wire connection)
then this receptacle powers 120 Volt AC, 60 Hz,
single phase loads requiring up to 30A or 3600
Watts of power.
7. General Specifications
8. 12V DC Connectors – Use to operate 12V DC
8A devices.
9. Ground Terminal – Consult an electrician for
local grounding regulations.
23