Aukey LT-ST23 Manual Del Usuario página 5

Powering On/Off the Light
● Long-press the multi-function button to turn on/off the light
● When the light is switched on, the LED indicator is blue (or flashes
red when battery is below 20%)
● With the light on, double-tapping the touch control point
(center-top of the light cover) also switches the light on/off, but
off is standby with touch control active. Only the multi-function
button switches the light fully off
Switching Between Light Modes
There are four main light modes: cool white, soft yellow, manual
RGB color-cycling, and automatic RGB color-cycling.
● Switch between light modes by pressing the multi-function button
Adjusting Light Brightnes
● Long-press the touch control point until you get the desired
brightness. On each long press, the brightness will smoothly scale
in the opposite direction
● Stop at any brightness level between the highest and lowest (LED
indicator will flash green when these are reached)
● Brightness is only adjustable in cool white and soft yellow light
modes
Using the Light Color Modes
There are two RGB color-cycling light modes. The first is manual and
the second is automatic. Use manual to choose a color. Automatic
cycles through all the colors continuously.
● In manual, long-press the touch control point until you get the
desired color
- 03 -