Connecting A/V Equipment; Input From Device To Tv; Output From Tv To Device - Emerson EMTV21785 Manual Del Usuario

Instruction Manual
INSTALLATION (continued)

Connecting A/V Equipment

The following are diagrams showing basic instructions for attaching external equipment, like a VCR or DVD player, to your
TV set. Please refer to operation manuals of external audio/video equipment that will be connected to your set for
additional instructions. PLEASE TURN OFF ALL POWER BEFORE CONNECTING DEVICES TOGETHER.
Connect VCR's RF OUT terminal to the RF IN jack located on the real panel of the TV.
VCR

Input from Device to TV

A UDIO/VIDEO IN
DVD Player
Camcorder
VCR

Output from TV to Device

A UDIO/VIDEO OUT
VCR
The side terminals may be easier to use with a camcorder. The connections are identical.
Coaxial Cable
DO NOT use the DVD IN terminals and AV IN (2) terminals at the same time.
DO NOT connect side AV IN (1), rear AV IN(1) and S-Video terminals at the same time.
Use only one of the three.
With DVD signal input, there is no DVD video output. Also, remember to connect the
audio cables when using S-Video and DVD terminals.
With S - VIDEO Terminal
VIDEO
AUDIO
YCbCr
VIDEO
AUDIO
6
RF IN