To Remove Limescale; Disinfection - Pressalit Care 3000 Instrucciones De Uso Y Mantenimiento

To remove limescale

To remove limescale marks on the aluminium parts, use 3 parts 30%
household vinegar to 7 parts water and afterwards wipe the parts with a cloth
wrung out in clean water.
In countries with relatively high levels of lime in the water supply, it may be
necessary to remove limescale deposits from the aluminium parts using a
de-scaling agent such as acetic acid. Test this first on an area that is not visible
when the table is in use.

Disinfection

When using the shower table for multiple patients, it is necessary to both
clean and disinfect the shower table between uses on different patients to
prevent the risk of cross infection.
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and
comply with instructions for safe use, dilution, rinsing, drying,
handling and storage of the agent.
CAUTION
!
en
15